Heavyweight Steel Sheet Piling
Shoreline Steel offers these heavyweight steel materials available in ASTM-A-572 / GR.50 / ASTM-A-328 / Bare or Galvanized finish. All of the listed heavyweight sheet pilings are fully manufactured in the USA. All the heavyweight sheet piling can be cut to the length you need it. The heavyweight sheet piling can be used to prevent erosion to protect shores.
Mid-Heavy Sheeting Cross Section
| Section Type | Thickness | Weight | Weight | Sec. Mod. | Moment of Inertia | Coating Area | |
|---|---|---|---|---|---|---|---|
| Nominal | Lb/Square Ft. | Lb/Lineal Ft. | Inch3(Ft.Wall) | Inch4(Ft.Wall) | Sq.Ft/LF | ||
| Per Pile | Per Ft. of Wall | ||||||
| SZ -222 | .312 | 22.1 | 40.4 | 26.7 | 299.0 | 163.09 | 5.75 |
| SZ - 24 | .340 | 24.1 | 44.1 | 29.0 | 325.5 | 177.52 | 5.75 |
| SZ - 25 | .350 | 24.8 | 45.3 | 29.7 | 334.1 | 181.91 | 5.75 |
| SZ - 27 | .375 | 26.6 | 48.6 | 32.0 | 358.0 | 195.18 | 5.75 |
Bent Corners
- Outside Corners Only On Heavyweight Sheet Piling
- Corners Maybe Bent To Any Degree Up To 90 Degrees
- Custom Capping, Tie Backs, Waling, Fabricated Corners, Tees and Slip Joints Are Available